Preparing the Camcorder24Wireless ControllerFirst, insert the supplied CR2025 lithium button battery into thewireless controller.1 Press the tab in the direction of the arrow () and pull outthe battery holder ().2 Place the lithium button battery with the + side facing up().3 Insert the battery holder ().To use the wireless controllerPoint the wireless controller at the camcorder’s remote sensor whenyou press the buttons.• You can rotate the LCD panel 180 degrees to use the wirelesscontroller from the front of the camcorder.NOTES• When the camcorder cannot be operated with the wireless controller,or when it can only be operated at very close range, replace the battery.• The wireless controller may not work properly when the remote sensor is situated under strong light sources ordirect sunlight.
