Onscreen Displays and Data Code87Onscreen Displays and Data CodeYou can turn most onscreen displays on or off.Repeatedly press h to turn the onscreen displays on/off in the following sequence:, mode:• All displays on• Most displays off1, mode 2 :• Only data code on• All displays on1 Pressing h will turn off most of the icons and displays thatappear automatically but will not remove control buttons ([FUNC.],[PHOTO], etc.) and onscreen displays that were turned on manually(for example, onscreen markers or the audio level meter).2 Touch the screen to display the playback controls.Operating modes:About the Data CodeWith every scene or photo recorded, the camcorder keeps a data code (date/time of recording,information about the camera setup, etc.).You can select the information to be displayed with the y / z [Data Code] setting.
