Using a Memory Card39NOTES• You cannot use relay recording from the built-in memory to memory card Y. When using a singlememory card, be sure to insert it into memory card slot X.• There will be a momentary stop in the scene at the point where the camcorder switches from onememory to another.• Any of the following actions will deactivate the relay recording function:- Turning off the camcorder.- Opening the double memory card slot cover.- Changing the position of the mode switch.- Changing the camcorder’s operating mode.- Changing the memory used for recording movies.Double Slot RecordingDouble slot recording allows you to record the same scene simultaneously to both memory cards. Thisis a convenient way to make a backup copy of your recording while you record.1 Insert memory cards into memory card slot X and memory card slot Y.2 Open the [Rec Media for Movies] screen.[FUNC.] [MENU] 8 [Rec Media for Movies]3 Activate double slot recording.[4] [Double Slot Rec] [A]4 Touch [a].• will appear on the screen.NOTES• If a memory card becomes full during double slot recording, recording on both cards will stop.• If an error occurs with one of the memory cards, recording will continue on the other card.Operating modes:
