Preparing the Camcorder29To use the wireless controllerPoint the wireless controller at the camcorder’s remote sensor when you press the buttons.• You can rotate the LCD panel 180 degrees to use the wireless controller from the front of thecamcorder.• When you operate the wireless controller, the camcorder's tally lamp will illuminate.NOTES• When the camcorder cannot be operated with the wireless controller, or when it can only beoperated at very close range, replace the battery.• The wireless controller may not work properly when the remote sensor is situated under strong lightsources or direct sunlight.Using a TripodYou can mount the camcorder on a tripod but do not use tripodswith mounting screws longer than 6.5 mm (0.26 in.) as this maycause damage to the camcorder.
