Capturing Video Snapshot Scenes and Photos from a Movie103Capturing Video Snapshot Scenes and Photos from a MovieYou can capture video snapshot scenes, single photos or a series of continuous photos from apreviously recorded scene. For example, you may want to print photos from video recorded at a partyor create a small video clip using video snapshot scenes from the highlights of an event.Capturing a Video Snapshot Scene1 Play back the scene or story from which you want to capture the video snapshot scene.2 Press g to capture the video snapshot scene.• The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves asa visual progress bar), and then enters playback pause mode. You can change the length of thevideo snapshot scenes you capture to 2 or 8 seconds with the 8 [Video SnapshotLength] setting.3 Touch [B] to stop the playback.NOTES• A video snapshot scene can be captured only during playback; it cannot be captured duringplayback pause mode.• The captured video snapshot scene is saved to the same memory that contains the source scene.• Video snapshot scenes cannot be captured from scenes shorter than 1 second.• When the source scene is itself a video snapshot scene, you may not be able to capture a videosnapshot scene depending on the length of the source scene and the length currently selected forvideo snapshot scenes.• When you start capturing a video snapshot scene less than 1 second from the end of the scene, thevideo snapshot scene will be captured starting from the beginning of the following scene.• During the playback of video snapshot scenes captured from a previously recorded movie, you maynotice some anomalies in the picture/sound at the point where the playback switches to a newscene.Operating modes:
