Using a Memory Card38Selecting the Memory for the RecordingsYou can select to record your movies and photos in the built-in memory or on a memory card. Thedefault memory for recording both is the built-in memory.POINTS TO CHECK• Be sure you understand the information provided in Eye-Fi Cards (0 37) before using an Eye-Ficard.1 Open the [Rec Media for Movies] or [Rec Media for Photos] screen.[FUNC.] [MENU] 8 [Rec Media for Movies] or [Rec Media for Photos]2 Touch [f] (built-in memory), [4] (memory card X) or [7] (memory card Y) and thentouch [a].• When selecting the memory, you can check the approximate available recording time/number ofphotos, based on currently used settings.NOTES• Select to record movies in the built-in memory or memory card X if you later want to convert themovies to standard definition in order to upload them to the Web.Relay RecordingYou can activate relay recording so if the memory you are using becomes full while recording movies,the recording will continue uninterrupted on a memory card.When recording on memory card X, you can use memory card Y for relay recording (497). Whenrecording in the built-in memory, you can choose to use only memory card X for relay recording(f94), or use both memory cards (f9497).1 Insert a memory card that contains no video recordings into the card slot of the memorycard you want to use for relay recording.• When relay recording from the built-in memory: memory card slot X or both memory card slots.• When relay recording from memory card X: memory card slot Y only.2 Open the relay recording screen.[FUNC.] [MENU] 8 [Rec Media for Movies] [f] or [4] [Relay Recording]3 Touch the desired option and then touch [a].• The approximate available recording time will now reflect the combined space in the memoriesused for relay recording.Operating modes:Operating modes:
