Recording Audio75Setting the XLR Terminal1 Set the audio input switch to EXT.• Changing the position of the audio input switch affectsboth channel 1 and channel 2 simultaneously.2 Set the XLR terminal switch of the desired channel to LINEor MIC.• To supply a microphone with phantom power, set theswitch to MIC+48V instead. Make sure to connect themicrophone first, before turning the phantom power on.Keep the microphone connected when turning off thephantom power.• When using the XLR terminal to record to only onechannel, use the CH1 input terminal and set the XLRterminal switch for CH1 to LINE, MIC or MIC+48V.Selecting the Recording ChannelYou can select to which channel the camcorder will recordaudio.1 Open the [XLR Rec Channel] screen.[FUNC.] [MENU] [4] [XLR Rec Channel]2 Touch the desired option and then touch [a].Options ( Default value)Activating the Microphone AttenuatorYou can activate the external microphone’s attenuator (20 dB) if the XLR terminal switch is set to MICor MIC+48V.Set the ATT switch of the desired channel to ON.IMPORTANT• When connecting a microphone or device that does notsupport phantom power, make sure to set the XLR terminalswitch to MIC or LINE, respectively. If you set the switch toMIC+48V, the microphone or device may be damaged.[ CH1] Records audio to each channel separately. Audio input into CH1 is recorded tochannel 1, while audio input into CH2 is recorded to channel 2.[ CH1/CH2] Audio input into CH1 is recorded to both channels. Audio input into CH2 will not berecorded.Audio input switchXLR terminal switches
