Troubleshooting161When playing back scenes/slideshow with background music, the music track is not playedback correctly.- This can occur when you transfer the music files to a memory card after repeatedly recordingand deleting scenes (fragmented memory). Save your recordings (0 135) and initialize thememory card (0 40). Then, transfer the music files first and only then transfer the video files.- Music tracks will not play back correctly if the connection was interrupted while transferring themusic files to a memory card. Delete the music tracks and transfer the music files again.- The transfer rate of the memory card used is too slow. Use a recommended memory card(0 36).When playing scenes/a slideshow linked to external audio, the video playback is not correctlylinked to the external player.- The volume of external player may be too low. Try increasing the volume of the external player.Cannot divide scenes- You cannot divide scenes recorded or edited using another device.- The memory is full. Delete some recordings (0 98, 130) to free some space.Cannot copy scenes/photos- You may not be able to copy scenes/photos recorded or edited using another device.Cannot mark individual scenes/photos in the index screen with a checkmark O- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [AllPhotos] option instead of [Select].Indicators and Onscreen Displayslights up in red.- Battery pack is exhausted. Replace or charge the battery pack.appears on the screen.- The camcorder cannot communicate with the battery pack attached so the remaining batterytime cannot be displayed.The tally lamp does not light up.- Change the 6 [Tally Lamp] setting to [On].The tally lamp flashes quickly (4 flashes per second).- The battery pack is exhausted. Replace or charge the battery pack.- The memory is full. Delete some recordings (0 98, 130) to free some space or replace thememory card.4/7 lights up in red.- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card.Initialize the memory card if the display does not change back to normal.- The memory card is full. Replace the memory card or delete some recordings (0 98, 130) tofree some space on the memory card.Even after stopping recording, the ACCESS indicator does not go off.- The scene is being recorded in the memory. This is not a malfunction.The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-second intervals).- Charging has stopped because the compact power adapter or the battery pack is faulty.Consult a Canon Service Center.
