Appendix: Menu Options Lists154[Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Control) function. When youconnect the camcorder to an HDTV compatible with HDMI-CEC using an optional HDMI cable, youcan control the camcorder’s playback using the remote control of the TV.• If set to [A On], when the camcorder is connected to a compatible HDTV using an optional HDMIcable, the video input on the TV will automatically be set to the camcorder’s video input. Then, youcan use the up/down/left/right buttons and the OK or SET button on the TV’s remote control to playback your recordings.• Depending on the TV set, additional settings may be required on the TV itself to activate the HDMI-CEC function. Refer to the TV’s instruction manual.• Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting thecamcorder to compatible TV sets. If you cannot use the remote control of the TV, set [Control forHDMI] to [B Off] and operate the camcorder directly or use the camcorder’s wireless controller.• The remote control of the TV can only be used to play back movies or photos ( or modeonly). If the camcorder is connected to the TV while it is set to a recording mode, depending on theTV used, turning off the TV will automatically turn off the camcorder even if it is recording at the time.• We recommend not connecting more than 3 HDMI-CEC compatible devices at a time.[HDMI 1080p Output]: If set to [A On], when the camcorder is connected using an optional HDMIcable to an HDTV that supports the 1080p standard, your video recordings (made in 1080i) will beconverted and output as 1080p.[HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMIOUT terminal.[Distance Units]: Selects the units to use for the focusing distance display during manual focus.[Demo Mode]: The demonstration mode displays the camcorder’s main features. It starts automaticallywhen the camcorder is powered with the compact power adapter if you leave it turned on without amemory card for more than 5 minutes.• To cancel the demo mode once it has started, press any button or turn off the camcorder.[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usuallyunavailable.
