Copying Recordings to a Memory Card134To select individual photos1 Touch on the individual photos you want to copy.• A checkmark O will appear on the photos you touch. The total number of selected photos willappear next to the o icon.• Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch[Remove All] [Yes].2 After selecting all the desired photos, touch [OK].OptionsIMPORTANT• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do somay result in permanent data loss.- Do not open the double memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• When copying photos onto an Eye-Fi card in memory card slot Y, photos will be uploadedautomatically if you are within the range of a configured network. Always verify that Eye-Fi cardshave been approved in the country/region of use. See also Using an Eye-Fi card (0 142).NOTES• In the following cases, you will not be able to copy recordings to the memory card:- If the double memory card slot is open.- If the LOCK switch on memory card Y is set to prevent writing.- If there is no memory card in memory card slot Y.• If there is not enough space on memory card Y, as many photos as possible will be copied beforestopping the operation.[Select] Select individual photos to copy.[All Photos] Copy all the photos.
