5) Disconnect the connector i, and remove thetwo mounting screws o; then, remove the Xdirection drive motor assembly !0 togetherwith the support plate.Figure 4-2136) Detach the X direction drive belt from the pul-ley on the left side.7) Remove the two mounting screws, and removethe X direction drive motor from the supportplate while detaching the X direction drive belt.C. Drum Motor Assembly1. Removing the Drum Motor Assembly1) Remove the rear cover.2) Remove the mounting screw, and remove theharness guide plate.3) Remove the exhaust fan. (p. 4-7)4) Disconnect the two connectors q, and removethe four mounting screws w; then, while loos-ening the tensioner e, remove the drum motorassembly r.Figure 4-214When installing the drum motor to the copi-er, fix it in place with screws while movingthe motor to the delivery side.4. MECHANICAL SYSTEMCOPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-19910822341Caution:
