4) Disconnect the connector y, and remove thetwo mounting screws u; then, remove the lensY direction motor i together with the supportplate.Figure 4-2105) Detach the Y direction drive belt from the Ydirection drive motor.6) Remove the two mounting screws, and removethe motor from the support plate.When installing the lens cover, push therear light-blocking plate toward the insideso that it will securely fit the inside of thelens cover.2. Lens X Direction Drive Motor1) Remove the copyboard glass.2) Remove the two mounting screws q, and dis-connect the connector w; then, remove theoriginal sensor unit e.3) Remove the three mounting screws r, andremove the lens cover t.Figure 4-2114) Remove the two mounting screws y, andremove the X direction drive belt cover u.Figure 4-2124. MECHANICAL SYSTEMCOPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)4-186 77 8Caution:2 11 444 536 7
