6) Remove the fixing motor. (p. 4-21)7) Remove the fixing relay drive assembly. (p.4-28)8) Remove the three mounting screws !0, andremove the fixing buffer drive assembly !1.Figure 4-248Be sure to mark the position with a scribebefore loosening the tension of the fixingdrive assembly.Figure 4-249L. CW/CCW Rotation Roller1. ConstructionFigure 4-2502. Removing the CW/CCW Rotation Roller1) Remove the rear right cover and the rear lowerleft cover.2) Remove the fixing motor. (p. 4-21)3) Remove the fixing relay drive assembly. (p. 4-28)4) Remove the E-ring q, and loosen the drivebelt w. Disconnect the two connectors e ofthe clutch, and remove the four mountingscrews r; then, remove the CW/CCW rotationroller drive assembly t.Figure 4-2514. MECHANICAL SYSTEMCOPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)4-30111010Caution:Marking24451344
