Canon NP6085 Service Manual

Contents

Canon NP6085 Service Manual Manual pdf 238 page image

COPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)3. OPERATIONS AND TIMING3-180X. SERVICE MODEA. OutlineThe NP6085’s service mode is classified intothe following seven types:Table 3-1001Each mode has its own items as discussed inthe pages that follow. Make sure of the messagedisplay as necessary for checks.B Using Service Mode1) Open the front doors, and insert the doorswitch actuator. If you want to use such modesas I/O display mode while making copies, setappropriate copying modes.2) Press the service mode switch (SW921 on theservice switch PCB) with a hex key.• The machine starts service mode and indi-cates ‘$’ in the upper left corner of the mes-sage display.Figure 3-1001 (service mode switch)3) Press the key twice to open the Selectionscreen.Then, select the mode (Table3-1001) you wantto check or adjust.4) Press the / key to select the appropriatescreen.5) Make a check or adjustments.6) End service mode.• Press the Reset key ( ) once to endthe current mode.• Press the Reset key twice to end servicemode.• Service mode ends when the power switchis turned OFF or the power plug is discon-nected. (It cannot be ended, however, byopening the front door or the delivery door.)Reference:A press on the key will bring up theSelection screen.[Item Display Description[ 1 [ DISPLAY Display mode[ 2 [ I/O DISPLAY I/O display mode[ 3 [ ADJUST Adjustment mode[ 4 [ FUNCTION Function mode[ 5 [ USER OPTION User option mode[ 6 [ COUNTER Counter mode[ 7 [ APPLICATION Option mode