COPYRIGHT © 1996 CANON INC. CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)3. OPERATIONS AND TIMING3-181C. Using Adjustment Modeand User Option ModeIn adjustment mode and user option mode, thesettings on the control panel are stored in theRAM on the DC controller PCB to simulate con-ventional VRs and SWs.Figure 3-1002 shows the label attachedbehind the copier’s front right door.Each copier is adjusted in the factory, and theadjustment values are recorded on the label.You must always enter the values recorded onthe label in the RAM on the DC controller PCBwhenever you have replaced the DC controllerPCB or the RDF controller PCB or cleared theRAM.Further, be sure to record any new values youused in the field.Figure 3-1002TYPDRUM_SELATMBRAKE_SCLE_BLANKMULT_SZPRETRANSTRN_ 1TRN_ 2SEP_ 1SEP_ 2REGIST_HLIGHT_ 5HLIGHT_ 5PHGLEAM_ 5HAE_SLOPREGIST_LLIGHT_ 5LLIGHT_ 5PLGLEAM_ 5LCFFRGSTCFFLIGHTCFFGLEAMCFFAESLPTYPA 4_PSZA 3_PSZA 4 R_PSZB 4_PSZB 5_PSZB 5 R_PSZLTR_PSZ11X17_PSZLTRR_PSZLGL_PSZBOOK_ERAPRIMARYDOC_ST_RDOC_ST_LDOC_ST_MLA_LCKPSRF_LENSYP_INTL_RP_INTL_LRF_AEF5LRF_AEF9LRF_AEF5RRF_AEF9R
