88EEditingREW PLAY FFRECPAUSE SEARCHSELECTZERO SETMEMORYAUDIODUB. STOPAVINSERT PAUSE SLOW+ /– /×2RECSEARCH RECSEARCH FOCUS AE SHIFTSLIDE SHOWDigital video equipment fitted with the DV terminal lets you edit, copy andtransfer data digitally, with virtually no generation loss in image and soundquality. The DV terminal is for both line-in and line-out, since a single DV cablecan handle data in both directions.• If a digital VCR is connected and an anomalous signal is sent from the VCR,the images recorded on the tape may also be anomalous (although it may notappear so on the TV image), or not recorded at all.• You are unable to dub tapes recorded with the copyright protective signal.Side with arrow Side with arrow: Signal flow1. Connect the camcorder and the other digital device.• Connect the Canon CV-150F DV cable (optional) with the sides of the plugsmarked with the arrows facing as shown above.2. Prepare the other device.• Turn on the power and load a recorded cassette.3. Turn the camcorder’s POWER switch to PLAY (VCR), and movethe camcorder’s TAPE/CARD switch to TAPE.• DV IN appears in the display.4. Load a blank cassette.Example dubbing to the camcorderPreparationsDubbing to/from a cassette with Digital Video EquipmentDownloaded From VideoCamera-Manual.com Manuals
