142EAdditionalInformationTroubleshootingRefer to this checklist first if you have any problems with your camcorder.Possible explanations are given for each problem on the list — turn to the pagenumbers in parentheses for more information.Make sure that the camcorder is properly connected if you are using it with a TVor VCR. Consult your dealer or service outlet if problems persist.Recording/PlaybackCause and/or what to do about it• The camcorder is not set to theappropriate mode ( 19, 29).• The cassette is not loaded or is set forerasure prevention ( 17-18).• The cassette has reached the end.• The power source is not properlyconnected, or the battery pack isexhausted or not properly attached( 12-16, 135).• The function cannot be used in thatrecording program ( 59).• The camcorder was in record pausemode for more than about 5 minutes( 19, 108, 154).• The battery pack is exhausted( 13-16, 135).• The battery pack’s power isexhausted. Recharge or change to anew battery pack ( 13-16).• The cassette is not loaded or is set forerasure prevention ( 17-18).• The cassette has reached the end.• The camcorder is not set to theappropriate mode ( 19, 29).• You are attempting to play back orrecord copyright protected material( 90).• The video heads are badlycontaminated ( 140).Problem? Nothing happens when I press thebuttons.? The camcorder turned itself off.? The cassette compartment stoppedmid-operation whileloading/unloading a cassette.? The start/stop button doesn’twork.? There’s no picture in the display.? There’s a blank blue screen in thedisplay.Downloaded From VideoCamera-Manual.com Manuals
