85E Using the FullRange of FeaturesSearching the Tape (Photo Search/Date Search)This allows you to move quickly through still pictures recorded anywhere on atape (photo search) or between different days or areas of recording (date search)on a tape.1. Press the SEARCH SELECT button to choose between photo/datesearch.• PHOTO SEARCH or DATE SEARCH is shown in the display for 4seconds.2. Press the - and + buttons to move backwards or forwardsthrough the still pictures or between different days of recording.• Press once to move to the start of the previous/next still picture or day onthe tape.• You can press more than once to move to the corresponding still picture orday (up to a maximum of 10 times), e.g. press the + button 5 times tomove forward 5 still pictures or days.• PHOTO SEARCH/DATE SEARCH appears in the middle of the displayalongside the - or + mark and number to search through. You canchange direction easily by pressing the button for the opposite direction.Notes:• Press 3 (stop) to stop mid-search.• If you begin a search very close to the start of a recorded still picture duringphoto search, the camcorder may skip straight past it.• When you have set the area for the World Clock, date search also looks for thechange in date based on the adjusted time.• A date/area cannot be identified if the total recording time on that day/area wasless than 1 minute.• Date search playback may start just before or after the beginning of the locatedsection.• If the data code is not displayed correctly you will not be able to operate thedate search correctly.REW PLAY FFREMOTE SETSEARCHSELECTZERO SETMEMORYAUDIODUB.STOPAVINSERTPAUSE SLOW ×2+ /– /POWERCAMERAPLAY(VCR)OFF+ PLAY(VCR)TAPEDownloaded From VideoCamera-Manual.com Manuals
