113EUsing a Memory Card Card Jump FunctionYou can jump from the current image to the desired image of unadjacent imagenumber without displaying the images one by one.The numbers shown in the upper right in CARD PLAY (VCR) mode indicate the imagenumber of the current still image / total number of still images on the memory card.With an image in the display, press and hold the CARD +/– button.• Press the + button to jump through the images forwards and press the – buttonto jump backwards.• The image number moves forwards or backwards.• When you release the button, the still image, to which the currently shownnumber is assigned, appears in the display. Slide ShowWith an image in the display, press the SLIDE SHOW button.• The images are played back one after another.To stop the slide show, press the SLIDE SHOW button.• The slide show starts or stops each time you press the SLIDE SHOW button. Index ScreenUp to 6 images appear at once so you can searchquickly for an image.1. With an image in the display, press theindex screen button.• Up to 6 images appear in the display.2. Move the mark to the image you want to view.• Turn the selector dial downwards to go to the previous image and upwardsto go to the next image.• Turning the dial upwards at the last image will take you to the next indexscreen. Turning the dial downwards at the first image will take you to theprevious index screen.• Jump to the next/previous index screen with the CARD +/– buttons.3. Press the index screen button.• The image you have marked fills the whole display.+ PLAY(VCR)CARD+ PLAY(VCR)CARD+ PLAY(VCR)CARDINDEX 101–014343/50SEL. INDEXENDDownloaded From VideoCamera-Manual.com Manuals
