12EMasteringthe BasicsPowering Your CamcorderBefore operating your camcorder, you will need to use the power adapter to:Provide power from a mains outletorCharge a battery packNotes:• The power adapter converts current from a household power socket (100–240 VAC, 50/60 Hz) to the DC current used by your camcorder.• If the adapter is used next to a TV, it may cause bars to appear on the TV —move the adapter away from the TV or the aerial cable.Connecting the camcorder to a mains outlet12 34OFFPLAY(VCR)CAMERAPOWERUse the power adapter to provide your camcorder with instant power from a mainsoutlet. Always turn the camcorder off before connecting/removing the powersource.1. Set the POWER switch to OFF.2. Connect the power adapter to the camcorder’s DC IN terminal.3. Connect the power cable to the power adapter.4. Plug the power cable into a mains outlet.5. Disconnect the power adapter from the camcorder after use.Unplug the power cable from the mains outlet, then disconnect itfrom the adapter.Downloaded From VideoCamera-Manual.com Manuals
