29E Masteringthe BasicsPlaying Back a CassetteYou can use the LCD screen for instant, on-the-spot playback. The camcorder alsoplays back the sound track via the built-in speaker ( 32).• When you play back a tape, you can also close the LCD panel with its screenside facing up.• When you’re using the viewfinder to view playback, close the LCD panel.To play back your recordings on a TV, see p. 33.To use the wireless controller, see p. 49.Note:• To avoid accidental recording, make sure that you slide the tab on the cassetteso that it exposes the hole (the switch position is usually labelled SAVE orERASE OFF).1. Attach a power source and turn the POWER switch to PLAY(VCR).• The power indicator lights up.2. Make sure the TAPE/CARD switch is set to TAPE.3. Load the cassette.4. Press the e (play) button to start playback.• To end playback, press the 33 (stop) button.• To wind the tape forwards, stop playback and press the 11 (fast forward)button.• To wind the tape backwards, stop playback and press the `` (rewind)button.• If the playback picture is rough (mosaic-like noise), clean the video headsusing a Canon DVM-CL Digital Video Head Cleaning Cassette or acommercially available digital video head cleaning cassette.POWERCAMERAPLAY(VCR)OFFCARDTAPECARDTAPERECSEARCH RECSEARCH FOCUS AE SHIFTSLIDE SHOWDownloaded From VideoCamera-Manual.com Manuals
