|
150EAdditionalInformationScreen DisplaysTo display the date and time, press theDATA CODE button. See also p. 82.Press the wireless controller’s TVSCREEN button or turn TV SCREENon through the menu to see the otherdisplays on the TV screen. (Thedisplays appear white on-screen.) Theywill not be added to any recordings youmake with the camcorder.TVSCREENDATACODETo turn the display off, open the menu and select DISP. SET UP.Then select DISPLAYS, set it to OFF and close themenu.• If you turn the displays off, the LCD screen will be completely blank(including connected TV screen), but the camcorder will continue to showwarning/caution displays when necessary, and the data code appears in thedisplay if it is set to ON.• When operating the camcorder, the displays appear for 2 seconds. However,the displays do not disappear when displaying an index screen.indicates a flashing display.TV SCREEN•••ONDISP. SET UPDISPLAYS••••ONDISP.SET UPRECPAUSERecord pause mode( 19)Recording ( 20)The backup battery isnot properly installed,or needs replacing( 136).To turn TV SCREEN off, open the menu and select DISP. SET UP.Then select TV SCREEN, set it to OFF and close the menu.For instructions on how to hook the camcorder up to your TV, see p. 33.You can turn off the displays to give you a clear screen for playback.( 40)( 40)+ , + CAMERACARDCAMERATAPE+ , + PLAY(VCR)CARDPLAY(VCR)TAPETurning off the LCD screen displaysDownloaded From VideoCamera-Manual.com Manuals
|
