Check 1: Did you confirm the paper and print quality settings?Print Results Not SatisfactoryCheck 2: Check the status of ink tanks. Replace the ink tank if the inkhas run out.Routine MaintenanceCheck 3: Is the orange tape or protective film remaining?Make sure that all of the protective film is peeled off and the L-shape air hole is exposed, asillustrated in (A).If the orange tape is left as in (B), pull the orange tape and remove it.Check 4: Print the Nozzle Check Pattern and perform any necessarymaintenance operations such as Print Head Cleaning.Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print headnozzles.Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and PrintHead Deep Cleaning.If the Nozzle Check Pattern is not printed correctly:Check to see if a particular color's ink tank is not empty.If the Nozzle Check Pattern is not printed correctly though ink is sufficient, perform the Print HeadCleaning and try printing the Nozzle Check Pattern again.If the problem is not resolved after performing the Print Head Cleaning twice:Perform the Print Head Deep Cleaning.If the problem is not resolved after performing the Print Head Deep Cleaning, turn off themachine and perform another Print Head Deep Cleaning after 24 hours.If the problem is not resolved after performing the Print Head Deep Cleaning twice:If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged.Contact the service center.Check 5: When using paper with one printable surface, make sure thatPage 876 of 1037 pagesNo Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
