Advanced Guide > Printing Photographs Directly from a Compliant Device > Printing Photographs Directly from aPictBridge Compliant Device > Printing Photographs Directly from a PictBridge Compliant DeviceU052Printing Photographs Directly from a PictBridge CompliantDeviceYou can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phoneconnect to the machine using a USB cable recommended by the device's manufacturer, and printrecorded images directly without using a computer.ImportantDo not use the USB cable longer than around 10 feet / 3 meters to connect any PictBridgecompliant device to the machine since it may affect the operation of other peripheral devices.NoteWhen printing photos with the PictBridge compliant device connected to the machine, werecommend the use of the AC adapter supplied with the device. If you are using the device battery,be sure to charge it fully.Depending on the model or brand of your device, you may have to select a print mode compliantwith PictBridge before connecting the device. You may also have to turn on the device or select Playmode manually after connecting the device to the machine.Perform necessary operations on the PictBridge compliant device before connecting it to thismachine according to instructions given in the device's instruction manual.1. Make sure that the machine is turned on.2. Load paper.3. Make sure that the PictBridge compliant device is turned off.4. Connect the PictBridge compliant device to the machine using a USB cable (A)recommended by the device's manufacturer.The PictBridge compliant device turns on automatically.If your device does not turn on automatically, turn it on manually.When machine is correctly connected to the device, the message that the machine is connected willbe displayed on the LCD of the device. Refer to the device's instruction manual.Page 766 of 1037 pagesPrinting Photographs Directly from a PictBridge Compliant Device
