73A Fully Automatic Shooting (Scene Intelligent Auto)4 Take the picture.Press the shutter button completely totake the picture.X The captured image will be displayedfor 2 sec. on the LCD monitor.After you finish shooting, push downthe built-in flash with your fingers.The focus confirmation light <o> blinks and focus is notachieved.Aim the Area AF frame over an area with good contrast, then pressthe shutter button halfway (p.45). If you are too close to the subject,move away and try again.Multiple AF points light up simultaneously.Focus has been achieved at all those points. As long as the AF pointcovering the desired subject lights up, you can take the picture.The beeper continues to beep softly. (The focus confirmationlight <o> does not light up.)It indicates that the camera is focusing continuously on a movingsubject. (The focus confirmation light <o> does not light up.) Youcan take sharp pictures of a moving subject.Note that focus lock (p.75) will not work in this case.Pressing the shutter button halfway does not focus the subject.If the focus mode switch on the lens is set to <MF> (manual focus),set it to <AF> (autofocus).FAQThe <A> mode makes the colors look more impressive in nature, outdoor,and sunset scenes. If the desired color tone is not obtained, use a CreativeZone mode and select a Picture Style other than <D> and shoot (p.126).COPY
