w Printing3504 Set the printing effects.Set them if necessary. If you do not needto set any printing effects, go to step 5.What is displayed on the screendiffers depending on the printer.Select the option, then press <0>.Select the desired printing effect, thenpress <0>.If the <z> and <e> icons aredisplayed brightly, you can also adjustthe printing effect (p.352).* When you change the printing effects, changes are reflected in the imagedisplayed on the upper left of the screen. Note that the printed image may lookslightly different from the displayed image, which is only an approximation.This also applies to [Brightness] and [Adjust levels] on page 352.Printing Effect DescriptionEOn The image will be printed using the printer’s standard colors.The image’s Exif data is used to make automatic corrections.EOff No automatic correction will be applied.EVIVID The image will be printed with higher saturation to producemore vivid blues and greens.ENR Image noise is reduced before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. No automaticcolor adjustments are applied.zNatural MThe printing characteristics are the same as the “Natural”setting. However, this setting enables finer printing adjustmentsthan with “Natural.”EDefault The printing will differ depending on the printer. For details,refer to the printer’s instruction manual.If the shooting information of an image shot at the “H” ISO speed isimprinted, the correct ISO speed may not be imprinted.COPY
