D Using the Built-in Flash190Using the red-eye reduction lamp before flash photography can reducered eye.Red-eye reduction will function in any shooting mode except <7>,<3>, <5>, and <G>.1 Select [Red-eye reduc.].Under the [z2] tab, select [Red-eyereduc.], then press <0>.2 Select [Enable].Select [Enable], then press <0>.For flash photography, when youpress the shutter button halfway, thered-eye reduction lamp will light up.Set flash exposure compensation if the flash exposure of the subjectdoes not come out as desired. You can set flash exposurecompensation up to ±3 stops in 1/3-stop increments.1 Press the <Q> button. (7)X The Quick Control screen will appear.3 Red-eye Reductiony Flash Exposure CompensationNThe red-eye reduction feature is most effective when the subject looks atthe red-eye reduction lamp, when the room is well lit, or when you areclose to the subject.When you press the shutter button halfway, the scaledisplay on the bottom of the viewfinder will shrink andturn off. For best results, take the picture after thisscale display turns off.The effectiveness of red-eye reduction varies depending on the subject.COPY