Canon EOS 70D Instruction Manual

Also see for EOS 70D: Instruction manual Instruction manual Instruction manual Instruction manual Quick reference guide

Contents

Canon EOS 70D Instruction Manual Manual pdf 432 page image

432If there is a problem with the camera, anerror message will appear. Follow the on-screen instructions.* If the error still persists, write down the error number and contact yournearest Canon Service Center.Error CodesNumber Error Message and Solution01Communications between the camera and lens is faulty. Clean thelens contacts.Î Clean the electrical contacts on the camera and lens, use a Canonlens, or remove and install the battery pack again (p.19, 20, 30).02Card cannot be accessed. Reinsert/change card or format cardwith camera.Î Remove and insert the card again, replace the card, or format thecard (p.31, 57).04Cannot save images because card is full. Replace card.Î Replace the card, erase unnecessary images, or format the card(p.31, 57, 322).05The built-in flash could not be raised. Turn the camera off and onagain.Î Operate the power switch (p.35).06Sensor cleaning could not be performed. Turn the camera off andon again.Î Operate the power switch (p.35).10, 2030, 4050, 6070, 8099An error prevented shooting. Turn the camera off and on again orre-install the battery.Î Operate the power switch, remove and install the battery packagain, or use a Canon lens (p.30, 35).Error numberCause and countermeasuresCOPY