1393 White Balance CorrectionNWith just one shot, three images with different color tones can be recordedsimultaneously. Based on the color temperature of the current white balancesetting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). Whitebalance bracketing is possible up to ±3 levels in single-level increments.Set the white balance bracketingamount.In step 2 for “White Balance Correction”,when you turn the <5> dial, the “ ”mark on the screen will change to“ ” (3 points). Turning the dial to theright sets the B/A bracketing, and turningit to the left sets the M/G bracketing.X On the right, “Bracket” indicates thebracketing direction and correction amount.Pressing the <L> button will cancelall the [WB Shift/Bkt.] settings.Press <0> to exit the setting andreturn to the menu.Bracketing SequenceThe images will be bracketed in the following sequence: 1. Standardwhite balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standardwhite balance, 2. Magenta (M) bias, and 3. Green (G) bias.White Balance Auto BracketingB/A bias ±3 levelsDuring WB bracketing, the maximum burst for continuous shooting willbe lower and the number of possible shots will also decrease to approx.one-third the normal number.You can also set white balance correction and AEB together with whitebalance bracketing. If you set AEB in combination with white balancebracketing, a total of nine images will be recorded for a single shot.Since three images are recorded for one shot, it takes longer to record the shot to the card.You can change the number of shots for white balance bracketing (p.366).“Bkt.” stands for bracketing.COPY
