396You can check the battery’s condition on the LCD monitor. Each BatteryPack LP-E6 has a unique serial number, and you can register multiplebattery packs to the camera. When you use this feature, you can checkthe registered battery pack’s remaining capacity and operation history.Select [Battery info.].Under the [54] tab, select [Batteryinfo.], then press <0>.X The battery info screen will appear.3 Checking the Battery InformationBattery model or household power source being used.The battery level icon (p.36) is displayedtogether with the remaining battery capacityshown in 1% increments.The number of shots taken with the currentbattery. The number is reset when thebattery is recharged.Battery’s recharge performance level isdisplayed in one of three levels.(Green) : Battery’s rechargeperformance is fine.(Green) : Battery’s recharge performanceis slightly degraded.(Red) : Purchasing a new battery isrecommended.Battery positionThe use of a genuine Canon Battery Pack LP-E6 is recommended. If youuse batteries that are not genuine Canon products, the camera’s fullperformance may not be attained or malfunction may result.The shutter count is the number of still photos taken. (Movies are not counted.)The battery information will be displayed even when the LP-E6 battery pack isin Battery Grip BG-E14. If you use size-AA/LR6 batteries, only the battery levelindicator will be displayed.If communication with the battery is not possible or irregular for some reason,[Use this battery?] will be displayed. If you select [OK], you can continueshooting. However, depending on the battery, the battery info screen may notbe displayed or may not display battery info correctly.COPY
