Video • 39- Recording movies under fluorescent lights:If the screen starts to flicker, select[ SHUTTER-PRIO.AE] and set theshutter speed to 1/100.• Do not set the mode switch toduring the actual recording of a scene;the brightness of the picture may changeabruptly.LCD Video LightYou can use the brightness of the LCDscreen (LCD video light) to record incompletely dark places. For a brighterpicture, we recommend keeping adistance of about 20 cm – 60 cm (8 in. –2 ft.) from the subject and/or using the[ NIGHT] recording program.1 Turn on the LCD video light.[ LCD LIGHT OFF][ LCD LIGHT ON]Press2 Rotate the LCD panel toward thelens and point it in the direction ofthe subject.3 Press to turn on theviewfinder.Use the viewfinder to continuerecording.1 Using the viewfinder, repeat step 1above, selecting [ LCD LIGHTOFF] instead.Closing the LCD panel will also turnoff the LCD video light.2 Press to turn off theviewfinder's display.Self Timer1 Activate the self timer.[ MENU][ CAMERA SETUP][SELF TIMER] [ ON ]• Set [SELF TIMER] to [ OFF] tocancel the self timer.2 Press to close the menu.appears.3 Press on the camcorder tostart recording.The camcorder starts recording video( mode) or records a stillimage ( mode) after a10-second countdown. Thecountdown appears on the screen.NOTESOnce the countdown has begun, you canpress again or turn off thecamcorder to cancel the self timer.( 21)FUNC.FUNC.VIEWFINDERTO TURN OFF THE LCD VIDEO LIGHT( 21)VIEWFINDERFUNC.FUNC.Start/StopStart/Stop
