Express-Down WindowThis feature is on all windows. Press the switch to thesecond position and release the switch to activatethe express-down feature. To stop the window as itis lowering, pull up briefly on the switch again.Express-Up WindowThis feature is on the front windows. Pull the switch upto the second position and release the switch to activatethe express-up feature. To stop the window as it israising, pull up or press down briefly on the switch again.Programming the Power WindowsIf the battery on your vehicle has been recharged,disconnected, or is not working, you will need toreprogram each front power window for the express-upfeature to work. Before reprogramming, you will needto replace or recharge your vehicle’s battery.To program each front window, follow these steps:1. With the ignition in ACC/ACCESSORY, ON/RUN, orwhen Retained Accessory Power (RAP) is active,close all doors.2. Press and hold the power window switch until thewindow is fully open.3. Pull the power window switch up until the window isfully closed.4. Continue holding the switch up for approximatelytwo seconds after the window is completelyclosed.The window is now reprogrammed. Repeat the processfor the other windows.Express Window Anti-Pinch FeatureIf any object is in the path of the window when theexpress-up is active, the window will stop at theobstruction and auto-reverse to a preset factory position.Weather conditions such as severe icing may also causethe window to auto-reverse. The window will return tonormal operation once the obstruction or condition isremoved.2-26
