REMOTE DOOR LOCKThis feature allows you to select the type of feedbackyou will receive when locking the vehicle with theRemote Keyless Entry (RKE) transmitter. You will notreceive feedback when locking the vehicle with the RKEtransmitter if the doors are open. See Remote KeylessEntry (RKE) System Operation on page 3‑4 for moreinformation.Press the customization button until REMOTE DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:OFF: There will be no feedback when you press thelock button on the RKE transmitter.LIGHTS ONLY: The exterior lamps will flash when youpress the lock button on the RKE transmitter.HORN ONLY: The horn will sound on the second pressof the lock button on the RKE transmitter.HORN & LIGHTS (default): The exterior lamps willflash when you press the lock button on the RKEtransmitter, and the horn will sound when the lockbutton is pressed again within five seconds of theprevious command.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE DOOR UNLOCKThis feature allows you to select the type of feedbackyou will receive when unlocking the vehicle with theRemote Keyless Entry (RKE) transmitter. You will notreceive feedback when unlocking the vehicle with theRKE transmitter if the doors are open. See RemoteKeyless Entry (RKE) System Operation on page 3‑4for more information.Press the customization button until REMOTE DOORUNLOCK appears on the DIC display. Press the set/reset button once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:LIGHTS OFF: The exterior lamps will not flash whenyou press the unlock button on the RKE transmitter.LIGHTS ON (default): The exterior lamps will flashwhen you press the unlock button on the RKEtransmitter.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.4-82InformationProvidedby:
