37 ADAM-4000 Series User ManualChapter 3 I/O Modules3.5.2 Technical specification of ADAM-4015Table 3.1: Technical Specification of ADAM-4015Channel Number 6 differentialSupport Protocol ADAM ASCII and MODBUS/RTUInput Type Pt100, Pt1000, BALCO500, NiInput Connections 2 or 3 wiresWire Burnout Detection YesInput Type and Temper-ature RangePt100: -50 to 150° C0 to 100° C0 to 200° C0 to 400° C-200 to 200° CPt1000: -40 to 160° CBalco500: -30 to 120° CNi 50 RTD: -80 to 100° CNi 508 RTD: 0 to 100° CIsolation Voltage 3000 V DCSampling Rate 10 sample/second (total)Input Impedance 10 MΩResolution 16-bitAccuracy ±0.1% (Typical)CMR@50/60Hz 120 dBNMR@50/60Hz 100 dBSpan Drift ± 25 ppm/°CZero Drift ± 3 μV/°CWatchdog Timer System (1.6 second) and CommunicationPower Input +10~+30 V DC (non-regulated)Power Consumption 1.2 W @ 24VDCADAM-4015RTD type Temperature Range AccuracyPlatinum 100 (IEC)-50 ~ 150°C0 ~ 100°C0 ~ 200°C0 ~ 400°C-200 ~ 200°C0.10%Platinum 100 (JIS)-50 ~ 150°C0 ~ 100°C0 ~ 200°C0 ~ 400°C-200 ~ 200°C0.2% or betterPlatinum 1000 -40 ~ 160°C 0.10%BALCO 500 -30 ~ 120°C 0.50%Ni 508 -50 ~ 200°C 0.10%Ni 604 -80 ~ 100°C0 ~ 100°C 0.10%
