Resolving an Error or Warning 3813Com recommends that you do not deploy a network plan that containsconfiguration errors. Allowing configuration errors to be deployed to thenetwork can affect network stability.3 Click Close to place the changes into effect and close the dialog box.Disabling andReenabling RulesIf you disable a rule, you can use the Verification Options dialog box toreenable the rule. You also can disable rules, for the entire network planor for specific instances.To disable or reenable a rule:1 On the toolbar of the Verification panel click the Edit VerificationOptions icon. The Verification Options dialog box appears.2 Click Rules Control. The list of 3WXM verification rules appears.3 Locate the rule you want to disable. You can click on the Class or Ruleheaders to sort alphabetically by rule class or by rule name. You also canfilter the display to show only the rules in a specific class.To filter the rule list based on class:a Click Filter By Class. The rule list changes to list the rules in theselected class.b Select a rule class from the listbox. The list of rules changes to list therules in the selected class. In this example, the selected rule class is802.1X Network Access.4 In the Enabled column, click on the checkbox next to the rule. If you are reenabling a rule, go to step 5. If you are disabling a rule, go to step 8.5 In the Rule column, click on the rule name. The disable settings aredisplayed and become editable. If the rule is disabled for all instances, the Disable All Instancesoption is selected. If individual instances of the rule are disabled, the Disable SelectedInstances option is selected and the instances are listed. Instancesthat are disabled have checkmarks in the checkboxes next to them.
