180 CHAPTER 6: C ONFIGURING WX S YSTEM PARAMETERSUse this option when you are creating a new switch in 3WXM. Thisoption modifies the password in the network plan. However, if the switchis already deployed in the network, 3WXM cannot apply configurationchanges to the switch unless the enable password in 3WXM matches theenable password already configured on the switch.9 To change the Mobility Domain membership for the switch, select theMobility Domain from the Mobility Domain drop-down list.To leave the switch out of all Mobility Domains, select Not Assigned.10 To change the wiring closet membership for the switch, select the closetfrom the Wiring Closet drop-down list.To leave the switch out of all wiring closets, select Not Assigned.11 Click Save.Changing the WXSoftware VersionTo change the WX software version:1 Select the Configuration tool bar option.2 In the Organizer panel, select the WX switch.3 In the Task List panel, select Software Version.The Change Software Version wizard appears.4 Select the software version from the drop-down list.5 Click OK.Changing the WXModelTo change the WX model:1 Select the Configuration tool bar option.2 In the Organizer panel, select the WX switch.3 In the Task List panel, select Model.The Change Model wizard appears.4 Select the model from the drop-down list.5 Click OK.
