Creating and Managing Users in the Local User Database 301Creating a NamedUserTo create a named user:1 Access the Create Named User wizard:a Select the Configuration tool bar option.b In the Organizer panel, click the plus sign next to the WX switch.c Click the plus sign next to AAA.d Select Local User Database.e In the Task List panel, select User.2 In the Name box, type the name of the user (1 to 60 alphanumericcharacters, with no spaces or tabs).3 In the Password box, type the password for the user (1 to 80alphanumeric characters, with no spaces or tabs). You must specify apassword if you want the password to be encrypted in the configurationfile.4 In the User Group list, select a user group to assign the user to, if thegroup is already configured.You do not need to assign a user to a user group. If you do select a usergroup, you only need to specify a password for the user. All otherattributes are obtained from the user group.5 To set authorization attributes for the user, click Next and go to step 6.6 In the VLAN Name box, select or type the name of the VLAN that the userbelongs to (1 to 16 alphanumeric characters, with no spaces or tabs). TheWX switch will authorize the user for that VLAN. For more information onVLANs, see “Viewing and Configuring VLANs” on page 215.If the user requires administrative access only, you do not need to specifya VLAN.Otherwise, if you plan to set authorization attributes in another way, suchas adding the user to a group or configuring default AAA attribute valuesfor the SSID the user will access, click Finish.7 In the attribute row you want to configure, click the Attribute Valuecolumn.See Table 22 on page 305 for a description of user attributes and theirvalues.8 Type the new attribute value in lowercase characters. ACL names arecase-sensitive.
