EtherTRAK®2 and Etherbus®Dual Ethernet I/O Module1.2.6 E2-16DIAC-D Specifications1.2.7 E2/EB-32DO24-D SpecificationsEnvironmental SpecificationsHazardous locations (Class 1, Div 2, Groups A, B, C, D) UL 1604, CSA C22.2/213 (Does notcomply with Cenelec EN50021 Zone 2)Discrete Input ChannelsVoltage range E2-16DIAC-D: 60 – 140 VACInput Polarity: SourcingInput isolation: 150 Volts (16 channel modules only)Guaranteed ON voltage: 55 VACGuaranteed OFF voltage: 35 VACInput resistance: 10 KohmsInput Protection: High Impedance with overvoltage protectionFiltered ON/OFF delay: 25 ms (20 Hz. max. counting rate)Fastest response: 25 ms (20 Hz. max. counting rate)Discrete Output ChannelsOutput voltage range 10-30 VDCMax. output power: 0.5 Amps per channel, 8A per moduleMax. off state leakage: 0.01 mA (less than 10 uA)Short circuit protection: self-reset fuses (trip above 1.5 Amp)Min. load: 1 mAInrush current: 5 Amps (100 ms surge)Typical on resistance: 0.3 Ohms (Drop 0.3 VDC @ 1 Amp)All channels Scan rate: 1 msPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
