EtherTRAK®2 and Etherbus®Dual Ethernet I/O Module1.2.4 E2/EB-32DI24-D SpecificationsDiscrete Input ChannelsVoltage range: 10 – 30 VDCInput Polarity: SourcingGuaranteed ON voltage: 9 VDCGuaranteed OFF voltage: 5.0 VDCGuaranteed OFF current: 2 mA DCInput resistance: 10 KohmsInput current (@ 24 VDC) 3 mAInput Protection: High Impedance with overvoltage protectionChannel 1 in high-speed mode has 150V isolation (terminals 43 and 44)Filtered ON/OFF delay: 25 ms (20 Hz. max. counting rate)Fastest response: 1 ms (400 Hz. max. counting rate)Special fast counting rate: Up to 50 KHz on channels 1 and 2 (Chan 1 isolated, terms 43 and 44)Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reportingScan rate (all channels) 1 ms1.2.5 E2/EB-16DI24-D SpecificationsDiscrete Input ChannelsVoltage range: 10 – 30 VDCInput Polarity: SourcingInput isolation: 150 Volts (16 channel modules only)Guaranteed ON voltage: 9 VDCGuaranteed OFF voltage: 5.0 VDCGuaranteed OFF current: 2 mA DCInput resistance: 10 KohmsInput current (@ 24 VDC) 3 mAInput Protection: High Impedance with overvoltage protectionFiltered ON/OFF delay: 25 ms (20 Hz. max. counting rate)Fastest response: 1 ms (400 Hz. max. counting rate)Special fast counting rate: Up to 2 KHz on channels 1 and 2Pulse Counting Options: Count up, pulse timing and pulse rate 16 or 32 bit reportingScan rate (all channels) 1 msPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com