Scan to HomeWorkCentre™ 5735/5740/5745/5755/5765/5775/5790Workflow Scanning145Scan to HomeScan to Home allows you to scan hard copy originals at the WorkCentre™5735/5740/5745/5755/5765/5775/5790 and send them to a destination on the network which isspecified as your "Home" destination.You enter your Network Authentication login at the device. The device displays oneScan to Home template. When you scan adocument the authentication serverprovides the information as to who islogged in at the device.The Workflow Scanning option needs to beinstalled before this feature can be usedbut it is NOT necessary for the WorkflowScanning repositories and templates to beconfigured.Your System Administrator enables the Scan to Home option in Internet Services. Your SystemAdministrator also needs to enable Network Authentication for this feature to be available.Lightweight Directory Application Protocol (LDAP) connectivity may also be used.Using Scan to HomeThe Scan to Home option must be enabled and set up by the System Administrator in order for theScan to Home template to be available on the device. You must also be logged in on the device usingNetwork Authentication to use this option.1. Load the original documents in the document feeder or on the document glass.2. Press the Clear All (AC) button twice and then Confirm to cancel any previous screen programingselections.3. To log in select the Log In/Out button on the control panel.4. Use the keyboard to enter your User Name, then select the Next button.Use the keyboard to enter your Password, then select the Enter button.5. Press the Services Home button and select the Workflow Scanning option.The Workflow Scanning features are displayed.6. Select the Scan To Home template from the TemplateDestination list.
