Job AssemblyWorkCentre™ 5735/5740/5745/5755/5765/5775/5790Workflow Scanning134Job AssemblyThis tab provides access to the Build Job feature forcompiling jobs which have different originals or programingrequirements within a job. To access the Job Assemblyoptions, select Services Home and Workflow Scanning.Then select the Job Assembly tab.Build JobUse this feature to build a job that requiresdifferent settings for each page, or a segment ofpages.You can select the appropriate settings to beapplied to individual pages or segments of acompleted job. First split the originals intosections for individual programing.1. Select Build Job on the Job Assembly tab.2. Switch on Build Job by selecting the On button andselect Save.3. Select the options required for the first segment of thejob.4. Load the first segment originals and press Start.5. Remove the first segment originals. The Build Jobscreen displays the first segment in the list.Delete All Segments deletes the current Build Job andreturns you to the main Build Job screen.6. Select the options required for the second segment.7. Load the second segment originals and press Start.8. Repeat these steps until all segments of your job have been programmed and scanned.9. After the last segment has been scanned, select End Build Job to indicate you have finishedscanning and the job can be processed and completed.Some pageswith text andsome withphotosSome pages2 sided andsome 1 sidedVarioussizedoriginalsMore than100 pages
