01/024-118 8825/8830 PrinterADJ 10.3Repairs and AdjustmentsADJ 10.3 Fuser Temperature (with Tape)PurposeThe purpose is to check the temperature of the Heat Roll, using Temperature Sensitive Tape,in order to obtain the correct fusing.Check1. Ensure that the Fuser Thermistor is in positive contact with the Heat Roll.2. ( Figure 1): Prepare one strip of tape from the Temperature Sensitive Tape Kit.Figure 1 Preparing the Tape3. Enter diagnostics.4. ( Figure 2): Enter code [ 1004 in order to turn on the Heat Rod and bring the Heat Roll tothe run temperature. The following message is displayed .Figure 2 Fuser Warm Up Screen5. ( Figure 3): Check the bond paper fusing temperature, using the Temperature SensitiveTape, when the following message is displayed.Figure 3 Fuser Temperature Test Screen6. Open the Media Transport Latching Cover and press the tape firmly to the surface of theHeat Roll.7. Press the Exit button three times.Attach a strip of tapeto the holder
