01/024-418825/8830 Printer REP 8.17Repairs and AdjustmentsREP 8.17 Registration Drive RollParts List on PL 8.2WARNINGSwitch off the Main Power Switch. Disconnect the Power Cord.Removal1. Latch the Xerographic Module at the Service Position (REP 9.2).2. Remove the Media Transport Assembly (REP 8.1).3. Remove the Fabric Guide (REP 8.9).4. Remove the Pressure Plates (REP 8.5).5. Turn the Media Transport Assembly over.6. (Figure 1): Remove the Media Feed Drive Belt.7. Turn the Media Transport over and remove the screws (2 each side) and the baffle thatthey secure.Figure 1 Removing the Media Feed Drive BeltIdler Pulley1Disconnect the connector 2Remove the screws (3)4Remove the MediaFeed Drive Belt3Remove the motorAssembly
