01/024-458825/8830 Printer REP 9.1Repairs and Adjustments9. (Figure 4): Move the bearing out of the Xerographic Module Frame (Left Side).Figure 4 Moving the Bearing (Left Side)10. (Figure 5): Move the bearing out of the Xerographic Module Frame (Right Side).Figure 5 Moving the Bearing (Right Side)2Lift the Drum Assembly andmove the bearing to the right3Carefully lower theDrum Assembly1Disconnect the retain-ing clip that holds thebearing and rotate theclip out of the wayDrum Assembly1Loosen the wing nutand rotate the gearboxto disengage thebracket from the grom-2Discon-nect P/J 13Holding the gearbox out of the grommet, move theDrum Assembly to the right while moving the bearingout of the frame (Without Tag 8)Drum Assembly
