90 43-TV-25-35 GLO Iss.4 Dec 06 UKA5E01001767-04Power upGeneral Menu(Main Menu > Configure > Setup > Edit Setup > General)From this screen select the buttons required for General recorder configuration.• Ident - Unique recorder information; Name, Description and ID. See “Ident” onpage 90• Localisation - Set up the recorder for native language use and global settings. See“Localisation” on page 91• Factory - This menu contains Credits (for activating recorder options), FirmwareUpgrade, Calibration, Demo Traces, Reset Setup and Production. See “Factory” onpage 91• Batch - The Batch menu is for entering the Batch requirements for starting a newbatch, including using a Barcode reader. “Batch Menu” on page 97.• Printer - The Printer menu allows configuration for setting up a printer. See “PrinterMenu” on page 98.• Groups - Groups of Pens can be specified and named with a Group name or number.See “Groups” on page 99.When the configuration is complete select the Finish button to Commit, Discard or CommitLater. Select the Back button to return to the previous menu.Ident(Main Menu > Configure > Setup > Edit Setup> General > Ident)Unique recorder information.• Name - Enter the recorder’s name. Maximum characters 32• Description - Enter a description for the recorder using the on-screen keyboard. Maxi-mum characters 64• ID - This is a unique 4 digit identifier specific to this recorder. It is advised to change theID as all recorders will default to 0001. If Modbus communications are used, it is highlyrecommended to use the same number as the Modbus slave ID.When the configuration is complete select the Finish button to Commit, Discard or CommitLater. Select the Back button to return to the previous menu.
