Menu
Siemens SIREC D200 Manual
Also see for SIREC D200: Quick start guide
                                                                                                                                                                                                                                                                                              | |
Contents
|
100 43-TV-25-35 GLO Iss.4 Dec 06 UKA5E01001767-04Power upScreen Saver(Main Menu > Configure > Setup > Edit Setup> Screen > Screen Saver)Configure the screen display and Screen Saver functions. The default state for the ScreenSaver is disabled. The Screen Saver function helps to reduce backlight wear. When active,the back light is off and nothing on the display is visible. The screen saver will not functionin Setup Menus or in test mode.• Enabled - Toggle On and Off.• Timeout - Only available when the Screen Saver function is active. This is how long theScreen Saver will display on the screen. Programmable between 1 and 720 minutes insoftware, when disabled the screen will remain on permanently (enter 0 to disable).• Saver Type - Only available when the Screen Saver function is active. This is set toNormal.• Dim Saver - Only available when the Screen Saver function is active. Dim Saver willhelp to increase the life of the backlight and lower the screen brightness for night timeuse. Use Saver Brightness or Off Always.• Saver Level - Only available when the Dim Saver function is set to Use Saver Bright-ness. Select this to use the instant dimming slider which lowers the screen brightness.Default screen brightness is 80%. Adjustable between 10% and 100% of full brightness.This works on a square law rule that means if you reduce the saver level by 25% youwill double the backlight life. If you reduce the saver level by 50% you will quadruple thebacklight life. Normal backlight MTBF at 100% brightness is:• • SIREC D300 55,000 hours (86,500 at 80% brightness)• • SIREC D400 43,000 hours for the(67,000 at 80% brightness)• • SIREC D200 40,000 hours (62,500 at 80% brightness)When the configuration is complete select the Finish button to Commit, Discard or CommitLater. Select the Back button to return to the previous menu.Exit Screen SaverIf the screen saver is active on the recorder, any of the following will deactivate the screensaver,• User touches the recorder screen.• Any USB device is plugged in or unplugged.• On alarm - An alarm is triggered, the unit will not return to screen saver till the alarmstate is inactive and another screen saver time-out period has expired.Charts(Main Menu > Configure > Setup > Edit Setup> Screen > Charts)A Chart speed is the time it takes the data to travel from one side of the screen to the other.The recorder has up to 10 different chart speeds. There are 3 categories that can be set;Slow, Medium and Fast (default). Set up each category to display the desired chart speed.Limits are in place so that each speed cannot overlap. Eg. a Medium speed cannot be setfaster than the Fast speed. |
Related manuals for Siemens SIREC D200
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved