158 43-TV-25-35 GLO Iss.4 Dec 06 UKA5E01001767-04ReplayThe Replay button takes you to the process screen in replay mode. The replay screen con-sists of a chart and DPMs. For standard screens the replay chart is vertical or horizontal de-pending on the orientation of the screen you have come from. The replay screen has DPMsthat display max/min readings for each pen, these values are taken from where the cursoris positioned on the screen. Use the print button on the replay bar to print the replay screen.CursorOn the right hand side of the replay screen DPMs can display max/min readings for eachpen, these values are taken from where the cursor is positioned on the screen.Note: You can do replay on Bar, Charts and Digital Panel Meter process screens and thiswill jump into a trend replay screen with the DPM's showing the Min-Max values.When using Custom Screens you can only replay 8 Pens on the SIREC D300 and 12 on theSIREC D400 recorder even though you can have more pens than this on the custom screen.(Custom Screens are not available on the SIREC D200).The Replay toolbar will appear at the bottom of the screen.• Print - This will print the current replay screen. For network printers ensure all printer/serverinformation has been entered in “Network Admin” on page 73.• Rev – This is for reverse and is used to scroll back through previous data• Fwd – This is to scroll forwards on the chartFigure 6.3 Replay screenCursorSwitch between the Cursor moving on the chartor the Chart scrolling behind the cursor
