262 43-TV-25-35 GLO Iss.4 Dec 06 UKA5E01001767-04Sensor Compensation• Low Offset - enter an offset value that is offset against the Low Eng value.• High Eng - only active when Full Range is not active. Set the High limit for the Engineeringunits.• High Offset - enter an offset value that is offset against the High Eng value.-10V+10V-10V+10VSingle Point Sensor Compensation isused to offset the signal input by a userspecified amount over the full range.Dual Point Sensor Compensation is used tooffset the signal input by a user specifiedamount against the Low and High Eng val-ues. The offset amount can vary throughoutthe signal input range.Solid line shows without compensationand dotted line shows with compensationLow Offset of 5High Offset of -5Figure App H.21 Sensor Compensation100 High Eng0 Low Eng
