98 43-TV-25-35 GLO Iss.4 Dec 06 UKA5E01001767-04Power upPrinter Menu(Configure > Setup > Edit Setup> General > Printer)The Printer function is a firmware option that is selectable from the Factory menu > “Cred-its” on page 92. The screens that currently can be printed are all Status screens, Messagelists, Process screens and Replay screens.The printer network information should be entered prior to printing, see “Network Admin”on page 73. If the information is not entered in the Network Admin menu a dialog box willappear prompting you to enter Username, Password and Domain. Entering this informationinto the dialog will not populate the Network Admin menu. It is recommended that you fill inthis information into the Network Admin menu as it will not be affected by Firmware up-grades in the recorder.The Printer menu allows configuration for setting up a printer. The printer option displays aPrint button from various screens using a basic USB standard PCL (Printer Command Lan-guage) printer. For details on suitable printer types see “Print Support” on page 29.• Allow Printing - Tick to enable On and Off• Paper Size - Toggles between A4 and Letter• Orientation - Toggles between Landscape and Portrait• Printer Name - Enter the printer name as found on the network. For a local printer thatis connected directly to the recorder via USB, ensure the printer name is set to thedefault (LPT1:). Shared printers on a domain or work group require the network path tobe entered in the Printer name. The file path will contain the server name (this could bethe PC the printer is connected to or a print server) and the printer name.Eg. \\PC or print server name\printername• Colour Printer - Tick if a colour printer is being used for the screen capture facility.Screen captures can be printed as an Effect of an Event. See “Events - Causeand Effect” on page 80.If in doubt, contact your IT Administrator for advice.When complete go to Finish > Commit to implement the new set up
