Siemens A53457 Installation & Maintenance

INSTALLATION AND CONFIGURATION2-43Document No.: COM-00-05-16 June 2006, Revised June 2014Version: C.1a. To disable the Persistent Serial Telnet IP Address enter 0 (zero) in the first data field andthen press ENTER. The user will be returned to the Second Configuration Menu.b. To leave the first data field of the current IP Address unchanged, press ENTER.c. To change the first data field of the IP Address, type the digit(s) and then press ENTER.Entry can be any value from 1 to 255.d. Repeat step b or c above for each of the four data fields. After the fourth data field isfilled, the user will be returned to the Second Configuration Menu. Go to step 5.Figure 2-59. Change Persistent Serial Telnet IP Address Screen4. On the screen in figure 2-60, enter the symbolic name for the Persistent Serial Telnet IPAddress. Entries can consist of up to 40 characters including A-Z, 1-9 and 0, periods (.) anddashes (-). After entering the symbolic name press ENTER.The user will be returned to the Second Configuration Menu. Go to step 5.Figure 2-60. Change Persistent Serial Telnet IP Address Symbolic Name Screen5. Prior to exiting the Second Configuration Menu, select “Save changes then restart” to savechanges and restart the WAG.2.6.28.1 Typical PST Configuration Parameter SettingsThe following table shows typical configuration settings for a WAG using the Persistent SerialTunnel function.